Download BLUE Rt Assembly Manual PDF

TitleBLUE Rt Assembly Manual
TagsComponents Electrical Equipment Electrical Connector Inductor Printed Circuit Board
File Size581.7 KB
Total Pages8
Document Text Contents
Page 1

This document was written This document was written by Bob Parker and edited by Bob Parker and edited by John Bachman at by John Bachman at AnaTek Corporation. AnaTek Corporation. Some graphicsSome graphics

and text courtesy of Silicon Chip March/April issue 2004.and text courtesy of Silicon Chip March/April issue 2004.

BlueBlueBlueBlueBlueBlueBlueBlue Ring Tester KitRing Tester Kit

 Assembly & User Manual Assembly & User Manual

 AnaTek Corporation AnaTek Corporation
100 Merrimack Road, P. O. Box 1200100 Merrimack Road, P. O. Box 1200

 Amherst, NH 03031 USA Amherst, NH 03031 USA

603.321.0884, FAX 603.836.4436,603.321.0884, FAX 603.836.4436, [email protected] [email protected] 

 This ring tester is an inexpensi This ring tester is an inexpensive and effectiveve and effective
 way to test any high Q induct way to test any high Q inductive component. ive component. ItIt
is especially useful for doing a quick check onis especially useful for doing a quick check on
flyback, line output transformers and other highflyback, line output transformers and other high
frequency wound components like deflectionfrequency wound components like deflection
yoke windings and SMPS transformers.yoke windings and SMPS transformers.

 The LEDs on the left side  The LEDs on the left side show the Q of theshow the Q of the
device being tested, more lights = higher Q, i. e.,device being tested, more lights = higher Q, i. e.,
no lights = short circuit, red = Bad or low Q,no lights = short circuit, red = Bad or low Q,
yellow = ??? or medium Q, green = Good oryellow = ??? or medium Q, green = Good or
high Q.high Q.

Similer Documents