Document Text Contents
Page 1
FibeAir IP-10 Radio Specifications
General
6-18 GHz
Specification 6L,6H GHz 7,8 GHz 11 GHz 13 GHz 15 GHz 18 GHz
Standards ETSI, FCC ETSI ETSI, FCC ETSI ETSI ETSI, FCC
Operating Frequency Range (GHz) 5.85-6.45, 6.4-7.1 7.1-7.9, 7.7-8.5 10.7-11.7 12.75-13.3 14.4-15.35 17.7-19.7
Tx/Rx Spacing (MHz) 252.04, 240,
266, 300, 340,
160, 170, 500
154, 161, 168,
182, 196, 245,
300, 119,
311.32
490, 520, 530 266 315, 420, 644,
490, 728
1010, 1120,
1008, 1560
Frequency Stability +0.001%
Frequency Source Synthesizer
RF Channel Selection Via EMS/NMS
System Configurations Non-Protected (1+0), Protected (1+1), Space Diversity
Tx Range (Manual/ATPC) 20dB dynamic range
23-38 GHz
Specification 23 GHz 24-26 GHz 28 GHz 32 GHz 38 GHz
Standards ETSI, FCC ETSI, FCC ETSI, FCC ETSI, FCC ETSI, FCC
Operating Fequency Range (GHz) 21.2-23.65 24.2-26.5 27.35-31.3 31.8-33.4 37-40
Tx/Rx Spacing (MHz) 1008, 1200, 1232 800, 900, 1008 350, 500, 1008 812 1000, 1260, 700
Frequency Stability +0.001%
Frequency Source Synthesizer
RF Channel Selection Via EMS/NMS
System Configurations Non-Protected (1+0), Protected (1+1), Space Diversity
Tx Range (Manual/ATPC) 20dB dynamic range
System Specifications
FibeAir® IP-10
Technical
Introducing FibeAir IP-10
FibeAir IP-10 is Ceragon’s next generation carrier-grade wireless Ethernet backhaul product family. Combining advanced TDM and Ethernet
networking, FibeAir IP-10 facilitates cost effective, risk-free migration to IP and can be integrated in any TDM, hybrid or pure IP/Ethernet
network. This versatile solution supports the entire licensed spectrum – from 6GHz up to 38GHz – and offers a wide capacity range of
10Mbps - 500Mbps along with enhanced Adaptive Coding & Modulation for maximum spectral efficiency in any deployment scenario. With
FibeAir IP-10, Ceragon offers risk-free migration with the highest possible capacities at the lowest overall cost
1
Page 2
2
Capacity
7 MHz (ETSI)
Profile Modulation Minimum
required
capacity license
Number of
Supported E1s
Ethernet Throughput
Min Max
1 QPSK 10 4 9.5 13.5
2 8 PSK 25 6 14 20
3 16 QAM 25 8 19 28
4 32 QAM 25 10 24 34
5 64 QAM 25 12 28 40
6 128 QAM 50 13 32 46
7 256 QAM 50 16 38 54
8 256 QAM 50 16 42 60
Note: Ethernet throughput depends on average packet size.
10 MHz (FCC)
Profile Modulation Minimum
required
capacity license
Number of
Supported T1s
Ethernet Throughput
Min Max
1 QPSK 10 7 13 18
2 8 PSK 25 10 19 27
3 16 QAM 25 16 28 40
4 32 QAM 50 16 32 46
5 64 QAM 50 16 42 61
6 128 QAM 50 16 50 71
7 256 QAM 50 16 54 78
8 256 QAM 50 16 60 85
Note: Ethernet throughput depends on average packet size.
14 MHz (ETSI)
Profile Modulation Minimum
required
capacity license
Number of
supported E1s
Ethernet Throughput
Min Max
1 QPSK 25 8 20 29
2 8 PSK 25 12 29 41
3 16 QAM 50 16 42 60
4 32 QAM 50 16 49 70
5 64 QAM 50 16 57 82
6 128 QAM 100 16 69 98
7 256 QAM 100 16 81 115
8 256 QAM 100 16 87 125
Note: Ethernet throughput depends on average packet size.
FibeAir® IP-10
1Refer to RFU-C roll-out plan for availability of each frequency.
RFU support
Split-Mount installation FibeAir RFU-C (6 - 38 GHz)1
FibeAir RFU-P (11 - 38 GHz)
FibeAir RFU-SP (6 - 8 GHz)
FibeAir RFU-HS (6 - 8 GHz)
FibeAir RFU-HP (6 - 11 GHz)
All-Indoor installation FibeAir RFU-HP (6 - 11 GHz)
IDU to RFU connection Coaxial cable RG-223 (100 m/300 ft), Belden 9914/RG-8 (300 m/1000 ft) or
equivalent, N-type connectors (male)
Antenna Connection Direct or remote mount using the same antenna type. Remote mount:
standard flexible waveguide (frequency dependent)
Note: For more details about the different RFUs refer to the RFU documentation.
Page 8
FibeAir® IP-10
8
Receiver Threshold (RSL) with RFU-P (dBm @ BER = 10-6)
Profile Modulation Channel
Spacing
Occupied
Bandwidth
Frequency (GHz)
11-18 23-28 31 32-38
1 QPSK 10 MHz1
(FCC)
8.4 MHz -90.5 - - -
2 8 PSK -88.0 - - -
3 16 QAM -84.5 - - -
4 32 QAM -83.5 - - -
5 64 QAM -79.5 - - -
6 128 QAM -76.5 - - -
7 256 QAM -75.0 - - -
8 256 QAM -73.0 - - -
1 QPSK 14 MHz
(ETSI)
12.2 MHz -89.5 -89.5 -89.0 -88.5
2 8 PSK -86.0 -86.0 -85.5 -85.0
3 16 QAM -82.5 -82.5 -82.0 -81.5
4 32 QAM -81.0 -81.0 -80.5 -80.0
5 64 QAM -79.5 -79.5 -79.0 -78.5
6 128 QAM -76.5 -76.5 -76.0 -75.5
7 256 QAM -73.5 -73.5 -73.0 -72.5
8 256 QAM -71.0 -71.0 -70.5 -70.0
1 QPSK 20 MHz
(FCC)
17.4 MHz
-87.5 -87.5 -87.0 -86.5
2 8 PSK -85.5 -85.5 -85.0 -84.5
3 16 QAM -82.5 -82.5 -82.0 -81.5
4 32 QAM -80.5 -80.5 -80.0 -79.5
5 64 QAM -76.0 -76.0 -75.5 -75.0
6 128 QAM -74.5 -74.5 -74.0 -73.5
7 256 QAM -71.5 -71.5 -71.0 -70.5
8 256 QAM -69.5 -69.5 -69.0 -68.5
1 QPSK 28 MHz
(ETSI)
24.9 MHz -88.5 -88.5 -88.0 -87.5
2 8 PSK -84.5 -84.5 -84.0 -83.5
3 16 QAM -82.0 -82.0 -81.5 -81.0
4 32 QAM -77.5 -77.5 -77.0 -76.5
5 64 QAM -75.5 -75.5 -75.5 -74.5
6 128 QAM -71.0 -71.0 -70.5 -70.0
7 256 QAM -70.5 -70.5 -70.0 -69.5
8 256 QAM -67.5 -67.5 -67.0 -66.5
1 QPSK 30 MHz
(FCC)
26.9 MHz -86.0 -86.0 -85.5 -85.0
2 8 PSK -83.5 -83.5 -83.0 -82.5
3 16 QAM -80.0 -80.0 -79.5 -79.0
4 32 QAM -77.0 -77.0 -76.5 -76.0
5 64 QAM -74.5 -74.5 -74.0 -73.5
6 128 QAM -72.0 -72.0 -71.5 -71.0
7 256 QAM -69.5 -69.5 -69.0 -68.5
8 256 QAM -67.5 -67.5 -67.0 -66.5
1 QPSK 40 MHz
(ETSI/FCC)
35.6 MHz -85.0 -85.0 -84.5 -84.0
2 8 PSK -82.5 -82.5 -82.0 -81.5
3 16 QAM -79.0 -79.0 -78.5 -78.0
4 32 QAM -76.0 -76.0 -75.5 -75.0
5 64 QAM -73.0 -73.0 -72.5 -72.0
6 128 QAM -71.0 -71.0 -70.5 -70.0
7 256 QAM -68.5 -68.5 -68.0 -67.5
8 256 QAM -66.5 -66.5 -66.0 -65.5
Note: RSL values are typical
110 MHz channel spacing is supported for 6-15 GHz bands only.
Page 9
FibeAir® IP-10
9
Profile Modulation Channel
Spacing
Occupied
Bandwidth
Frequency (GHz)
11-18 23-28 31 32-38
1 QPSK 50 MHz
(FCC)
44.3 MHz -84.0 -84.0 -83.5 -83.0
2 8 PSK -81.5 -81.5 -81.0 -80.5
3 16 QAM -79.5 -79.5 -79.0 -78.5
4 32 QAM -77.0 -77.0 -76.5 -76.0
5 64 QAM -73.5 -73.5 -73.0 -72.5
6 128 QAM -70.5 -70.5 -70.0 -69.5
7 256 QAM -67.0 -67.0 -66.5 -66.0
8 256 QAM -65.5 -65.5 -65.0 -64.5
1 QPSK 56 MHz
(ETSI)
49.1 MHz -83.5 -83.5 -83.0 -82.5
2 8 PSK -81.0 -81.0 -80.5 -80.0
3 16 QAM -79.0 -79.0 -78.5 -78.0
4 32 QAM -75.5 -75.5 -75.0 -74.5
5 64 QAM -72.5 -72.5 -72.0 -71.5
6 128 QAM -69.5 -69.5 -69.0 -68.5
7 256 QAM -66.5 -66.5 -66.0 -65.5
8 256 QAM -65.0 -65.0 -64.5 -64.0
Note: RSL values are typical
Receiver Threshold (RSL) with RFU-P (dBm @ BER = 10-6) - continued
Page 15
FibeAir® IP-10
14
Power Input
Standard Input -48 VDC
DC Input range -40.5 to -57.5 VDC (up to -57 VDC for USA market)
Optional 110-220 VAC
24 VDC
Power Consumption
Max Power consumption IP-10 IDU 25W
Max System Power
Consumption - RFU-P+IDU
1+0: 65W
1+1: 105W
Max System Power
Consumption - RFU-SP+IDU
1+0: 80W
1+1: 130W
Max System Power
Consumption - RFU-HS+IDU
1+0: 88W
1+1: 134W
Max System Power
Consumption - RFU-HP+IDU
1+0: 105W
1+1: 150W
Max System Power
Consumption - RFU-C+IDU
1+0 with RFU-C 6-26 GHz: 47W
1+0 with RFU-C 28-38 GHz: 51W
1+1 with RFU-C 6-26 GHz: 84W
1+1 with RFU-C 28-38 GHz: 88W
Note: All specifications are subject to change without prior notification
Page 16
The Ceragon logo and FibeAir® are registered trademarks of Ceragon Networks Ltd. This brochure is being provided for informational
purposes only. The details contained in this document, including product and feature specifications, are subject to change
without notice. This brochure shall not bind Ceragon to provide to anyone a specific product or set of features related thereto.
Ceragon Networks Ltd.
Ceragon Networks Ltd. (NASDAQ and TASE: CRNT) is a leading provider of high-capacity LTE-ready wireless backhaul solutions.
We provide a broad portfolio of innovative, field-proven, high capacity wireless backhaul solutions for cellular operators, fixed/
wireless service providers as well as private network applications. These solutions are designed to deliver voice and premium data
services, eliminate the backhaul capacity bottleneck, significantly reduce backhaul costs and transition to next generation IP-based
networks.
Ceragon designs its FibeAir® solutions to provide fiber-like connectivity for circuit-switched, or SONET/SDH networks, next
generation Ethernet/Internet Protocol, or IP-based, networks, and hybrid networks that combine circuit-switched and IP-based
networks. Ceragon’s solutions support all wireless access technologies, including GSM, CDMA, EV-DO, WiMAX and LTE. These
solutions address wireless service providers’ need to cost-effectively build-out and scale their infrastructure to meet the increasing
demands placed on their networks by growing numbers of subscribers and the increasing demand for premium data services.
Ceragon also provides its solutions to businesses and public institutions that operate their own private communications networks.
Ceragon’s solutions are deployed by more than 150 service providers of all sizes, as well as in hundreds of private networks,
in nearly 100 countries. More information is available at www.ceragon.com
www.ceragon.com
re
f:
Fi
be
Ai
r I
P-
10
T
S
- V
4
-0
3-
20
09
Corporate Headquarters
Ceragon Networks Ltd.
Tel Aviv, Israel
Tel: +972-3-645-5733
Fax: +972-3-645-5499
Europe
Ceragon Networks
(UK) Limited
Redditch, UK
Tel: +44-(0)-1527-591900
Fax: +44-(0)-1527-591903
Asia Pacific
Ceragon Networks APAC
(S’pore) Ltd.
Singapore
Tel: +65-6339-3110
Fax: +65-6339-1310
North America
Ceragon Networks, Inc.
New Jersey, USA
Tel: +1-201-845-6955
Fax: +1-201-845-5665
Toll free: 1-877-FIBEAIR
CALA
Ceragon Networks,
S.A. de C.V
Mexico D.F, Mexico
Tel: +52-55-5663-2914
Fax: +52-55-5663-2841
MEA
Ceragon Networks,
Johannesburg
South Africa
Tel: +27-01-1452-2777
Fax: +27-01-1452-2777
FibeAir IP-10 Radio Specifications
General
6-18 GHz
Specification 6L,6H GHz 7,8 GHz 11 GHz 13 GHz 15 GHz 18 GHz
Standards ETSI, FCC ETSI ETSI, FCC ETSI ETSI ETSI, FCC
Operating Frequency Range (GHz) 5.85-6.45, 6.4-7.1 7.1-7.9, 7.7-8.5 10.7-11.7 12.75-13.3 14.4-15.35 17.7-19.7
Tx/Rx Spacing (MHz) 252.04, 240,
266, 300, 340,
160, 170, 500
154, 161, 168,
182, 196, 245,
300, 119,
311.32
490, 520, 530 266 315, 420, 644,
490, 728
1010, 1120,
1008, 1560
Frequency Stability +0.001%
Frequency Source Synthesizer
RF Channel Selection Via EMS/NMS
System Configurations Non-Protected (1+0), Protected (1+1), Space Diversity
Tx Range (Manual/ATPC) 20dB dynamic range
23-38 GHz
Specification 23 GHz 24-26 GHz 28 GHz 32 GHz 38 GHz
Standards ETSI, FCC ETSI, FCC ETSI, FCC ETSI, FCC ETSI, FCC
Operating Fequency Range (GHz) 21.2-23.65 24.2-26.5 27.35-31.3 31.8-33.4 37-40
Tx/Rx Spacing (MHz) 1008, 1200, 1232 800, 900, 1008 350, 500, 1008 812 1000, 1260, 700
Frequency Stability +0.001%
Frequency Source Synthesizer
RF Channel Selection Via EMS/NMS
System Configurations Non-Protected (1+0), Protected (1+1), Space Diversity
Tx Range (Manual/ATPC) 20dB dynamic range
System Specifications
FibeAir® IP-10
Technical
Introducing FibeAir IP-10
FibeAir IP-10 is Ceragon’s next generation carrier-grade wireless Ethernet backhaul product family. Combining advanced TDM and Ethernet
networking, FibeAir IP-10 facilitates cost effective, risk-free migration to IP and can be integrated in any TDM, hybrid or pure IP/Ethernet
network. This versatile solution supports the entire licensed spectrum – from 6GHz up to 38GHz – and offers a wide capacity range of
10Mbps - 500Mbps along with enhanced Adaptive Coding & Modulation for maximum spectral efficiency in any deployment scenario. With
FibeAir IP-10, Ceragon offers risk-free migration with the highest possible capacities at the lowest overall cost
1
Page 2
2
Capacity
7 MHz (ETSI)
Profile Modulation Minimum
required
capacity license
Number of
Supported E1s
Ethernet Throughput
Min Max
1 QPSK 10 4 9.5 13.5
2 8 PSK 25 6 14 20
3 16 QAM 25 8 19 28
4 32 QAM 25 10 24 34
5 64 QAM 25 12 28 40
6 128 QAM 50 13 32 46
7 256 QAM 50 16 38 54
8 256 QAM 50 16 42 60
Note: Ethernet throughput depends on average packet size.
10 MHz (FCC)
Profile Modulation Minimum
required
capacity license
Number of
Supported T1s
Ethernet Throughput
Min Max
1 QPSK 10 7 13 18
2 8 PSK 25 10 19 27
3 16 QAM 25 16 28 40
4 32 QAM 50 16 32 46
5 64 QAM 50 16 42 61
6 128 QAM 50 16 50 71
7 256 QAM 50 16 54 78
8 256 QAM 50 16 60 85
Note: Ethernet throughput depends on average packet size.
14 MHz (ETSI)
Profile Modulation Minimum
required
capacity license
Number of
supported E1s
Ethernet Throughput
Min Max
1 QPSK 25 8 20 29
2 8 PSK 25 12 29 41
3 16 QAM 50 16 42 60
4 32 QAM 50 16 49 70
5 64 QAM 50 16 57 82
6 128 QAM 100 16 69 98
7 256 QAM 100 16 81 115
8 256 QAM 100 16 87 125
Note: Ethernet throughput depends on average packet size.
FibeAir® IP-10
1Refer to RFU-C roll-out plan for availability of each frequency.
RFU support
Split-Mount installation FibeAir RFU-C (6 - 38 GHz)1
FibeAir RFU-P (11 - 38 GHz)
FibeAir RFU-SP (6 - 8 GHz)
FibeAir RFU-HS (6 - 8 GHz)
FibeAir RFU-HP (6 - 11 GHz)
All-Indoor installation FibeAir RFU-HP (6 - 11 GHz)
IDU to RFU connection Coaxial cable RG-223 (100 m/300 ft), Belden 9914/RG-8 (300 m/1000 ft) or
equivalent, N-type connectors (male)
Antenna Connection Direct or remote mount using the same antenna type. Remote mount:
standard flexible waveguide (frequency dependent)
Note: For more details about the different RFUs refer to the RFU documentation.
Page 8
FibeAir® IP-10
8
Receiver Threshold (RSL) with RFU-P (dBm @ BER = 10-6)
Profile Modulation Channel
Spacing
Occupied
Bandwidth
Frequency (GHz)
11-18 23-28 31 32-38
1 QPSK 10 MHz1
(FCC)
8.4 MHz -90.5 - - -
2 8 PSK -88.0 - - -
3 16 QAM -84.5 - - -
4 32 QAM -83.5 - - -
5 64 QAM -79.5 - - -
6 128 QAM -76.5 - - -
7 256 QAM -75.0 - - -
8 256 QAM -73.0 - - -
1 QPSK 14 MHz
(ETSI)
12.2 MHz -89.5 -89.5 -89.0 -88.5
2 8 PSK -86.0 -86.0 -85.5 -85.0
3 16 QAM -82.5 -82.5 -82.0 -81.5
4 32 QAM -81.0 -81.0 -80.5 -80.0
5 64 QAM -79.5 -79.5 -79.0 -78.5
6 128 QAM -76.5 -76.5 -76.0 -75.5
7 256 QAM -73.5 -73.5 -73.0 -72.5
8 256 QAM -71.0 -71.0 -70.5 -70.0
1 QPSK 20 MHz
(FCC)
17.4 MHz
-87.5 -87.5 -87.0 -86.5
2 8 PSK -85.5 -85.5 -85.0 -84.5
3 16 QAM -82.5 -82.5 -82.0 -81.5
4 32 QAM -80.5 -80.5 -80.0 -79.5
5 64 QAM -76.0 -76.0 -75.5 -75.0
6 128 QAM -74.5 -74.5 -74.0 -73.5
7 256 QAM -71.5 -71.5 -71.0 -70.5
8 256 QAM -69.5 -69.5 -69.0 -68.5
1 QPSK 28 MHz
(ETSI)
24.9 MHz -88.5 -88.5 -88.0 -87.5
2 8 PSK -84.5 -84.5 -84.0 -83.5
3 16 QAM -82.0 -82.0 -81.5 -81.0
4 32 QAM -77.5 -77.5 -77.0 -76.5
5 64 QAM -75.5 -75.5 -75.5 -74.5
6 128 QAM -71.0 -71.0 -70.5 -70.0
7 256 QAM -70.5 -70.5 -70.0 -69.5
8 256 QAM -67.5 -67.5 -67.0 -66.5
1 QPSK 30 MHz
(FCC)
26.9 MHz -86.0 -86.0 -85.5 -85.0
2 8 PSK -83.5 -83.5 -83.0 -82.5
3 16 QAM -80.0 -80.0 -79.5 -79.0
4 32 QAM -77.0 -77.0 -76.5 -76.0
5 64 QAM -74.5 -74.5 -74.0 -73.5
6 128 QAM -72.0 -72.0 -71.5 -71.0
7 256 QAM -69.5 -69.5 -69.0 -68.5
8 256 QAM -67.5 -67.5 -67.0 -66.5
1 QPSK 40 MHz
(ETSI/FCC)
35.6 MHz -85.0 -85.0 -84.5 -84.0
2 8 PSK -82.5 -82.5 -82.0 -81.5
3 16 QAM -79.0 -79.0 -78.5 -78.0
4 32 QAM -76.0 -76.0 -75.5 -75.0
5 64 QAM -73.0 -73.0 -72.5 -72.0
6 128 QAM -71.0 -71.0 -70.5 -70.0
7 256 QAM -68.5 -68.5 -68.0 -67.5
8 256 QAM -66.5 -66.5 -66.0 -65.5
Note: RSL values are typical
110 MHz channel spacing is supported for 6-15 GHz bands only.
Page 9
FibeAir® IP-10
9
Profile Modulation Channel
Spacing
Occupied
Bandwidth
Frequency (GHz)
11-18 23-28 31 32-38
1 QPSK 50 MHz
(FCC)
44.3 MHz -84.0 -84.0 -83.5 -83.0
2 8 PSK -81.5 -81.5 -81.0 -80.5
3 16 QAM -79.5 -79.5 -79.0 -78.5
4 32 QAM -77.0 -77.0 -76.5 -76.0
5 64 QAM -73.5 -73.5 -73.0 -72.5
6 128 QAM -70.5 -70.5 -70.0 -69.5
7 256 QAM -67.0 -67.0 -66.5 -66.0
8 256 QAM -65.5 -65.5 -65.0 -64.5
1 QPSK 56 MHz
(ETSI)
49.1 MHz -83.5 -83.5 -83.0 -82.5
2 8 PSK -81.0 -81.0 -80.5 -80.0
3 16 QAM -79.0 -79.0 -78.5 -78.0
4 32 QAM -75.5 -75.5 -75.0 -74.5
5 64 QAM -72.5 -72.5 -72.0 -71.5
6 128 QAM -69.5 -69.5 -69.0 -68.5
7 256 QAM -66.5 -66.5 -66.0 -65.5
8 256 QAM -65.0 -65.0 -64.5 -64.0
Note: RSL values are typical
Receiver Threshold (RSL) with RFU-P (dBm @ BER = 10-6) - continued
Page 15
FibeAir® IP-10
14
Power Input
Standard Input -48 VDC
DC Input range -40.5 to -57.5 VDC (up to -57 VDC for USA market)
Optional 110-220 VAC
24 VDC
Power Consumption
Max Power consumption IP-10 IDU 25W
Max System Power
Consumption - RFU-P+IDU
1+0: 65W
1+1: 105W
Max System Power
Consumption - RFU-SP+IDU
1+0: 80W
1+1: 130W
Max System Power
Consumption - RFU-HS+IDU
1+0: 88W
1+1: 134W
Max System Power
Consumption - RFU-HP+IDU
1+0: 105W
1+1: 150W
Max System Power
Consumption - RFU-C+IDU
1+0 with RFU-C 6-26 GHz: 47W
1+0 with RFU-C 28-38 GHz: 51W
1+1 with RFU-C 6-26 GHz: 84W
1+1 with RFU-C 28-38 GHz: 88W
Note: All specifications are subject to change without prior notification
Page 16
The Ceragon logo and FibeAir® are registered trademarks of Ceragon Networks Ltd. This brochure is being provided for informational
purposes only. The details contained in this document, including product and feature specifications, are subject to change
without notice. This brochure shall not bind Ceragon to provide to anyone a specific product or set of features related thereto.
Ceragon Networks Ltd.
Ceragon Networks Ltd. (NASDAQ and TASE: CRNT) is a leading provider of high-capacity LTE-ready wireless backhaul solutions.
We provide a broad portfolio of innovative, field-proven, high capacity wireless backhaul solutions for cellular operators, fixed/
wireless service providers as well as private network applications. These solutions are designed to deliver voice and premium data
services, eliminate the backhaul capacity bottleneck, significantly reduce backhaul costs and transition to next generation IP-based
networks.
Ceragon designs its FibeAir® solutions to provide fiber-like connectivity for circuit-switched, or SONET/SDH networks, next
generation Ethernet/Internet Protocol, or IP-based, networks, and hybrid networks that combine circuit-switched and IP-based
networks. Ceragon’s solutions support all wireless access technologies, including GSM, CDMA, EV-DO, WiMAX and LTE. These
solutions address wireless service providers’ need to cost-effectively build-out and scale their infrastructure to meet the increasing
demands placed on their networks by growing numbers of subscribers and the increasing demand for premium data services.
Ceragon also provides its solutions to businesses and public institutions that operate their own private communications networks.
Ceragon’s solutions are deployed by more than 150 service providers of all sizes, as well as in hundreds of private networks,
in nearly 100 countries. More information is available at www.ceragon.com
www.ceragon.com
re
f:
Fi
be
Ai
r I
P-
10
T
S
- V
4
-0
3-
20
09
Corporate Headquarters
Ceragon Networks Ltd.
Tel Aviv, Israel
Tel: +972-3-645-5733
Fax: +972-3-645-5499
Europe
Ceragon Networks
(UK) Limited
Redditch, UK
Tel: +44-(0)-1527-591900
Fax: +44-(0)-1527-591903
Asia Pacific
Ceragon Networks APAC
(S’pore) Ltd.
Singapore
Tel: +65-6339-3110
Fax: +65-6339-1310
North America
Ceragon Networks, Inc.
New Jersey, USA
Tel: +1-201-845-6955
Fax: +1-201-845-5665
Toll free: 1-877-FIBEAIR
CALA
Ceragon Networks,
S.A. de C.V
Mexico D.F, Mexico
Tel: +52-55-5663-2914
Fax: +52-55-5663-2841
MEA
Ceragon Networks,
Johannesburg
South Africa
Tel: +27-01-1452-2777
Fax: +27-01-1452-2777
